User's Guide: Create an Image

1.0 Introduction

A Fortanix Confidential Computing Manager (CCM) image is a particular software release or a version of an application. Each image is associated with one enclave hash (MRENCLAVE).

When an image is first created in Fortanix Confidential Computing Manager, it is in an unapproved state. After configurable approval actions are taken, the image is considered approved. When an image is approved, Fortanix CCM knows that enclaves with the associated hash (MRENCLAVE) are trusted instances of the corresponding application, and will issue certs with the application’s domain name(s) to those enclaves.

2.0 Prerequisites

• For Enclave OS application - the Tag of the Docker image for the application.

• For EDP application - the sigstruct.bin file which is used to register the enclave with Fortanix Confidential Computing Manager.

• For ACI application - the Tag of the Docker image for the application.

3.0 Create an Image for Enclave OS Applications

1. After you create an Enclave OS application, click the Applications menu item in the CCM UI left navigation bar, and select the required Enclave OS application for which you want to configure an application image.

2. On the following page, click the + IMAGE button to configure the image of the Enclave OS application.  

   

3. In the Add image form, select the Image Type as Intel SGX or AWS Nitro Enclaves depending on the platform used.

4. Enter the REGISTRY CREDENTIALS for the Output image name. Here, the registry credentials are the credentials needed to access the private docker registry where the image will be pushed. Since the input image is stored in a public registry, there is no need to provide credentials for the input image.

   • If you have added a registry in a particular account as described in User's Guide: Image Registry, then the check box Use saved credentials will be selected by default and the registry names for the output image will be filled automatically for the Add Registry Credentials fields.

     

   • If you have not saved any Registry Credentials, then manually enter the registry credentials for the Output image name. 

5. Enter the image Tag which is the tag value of the Docker image.

6. If you selected the Image Type as Intel SGX, enter the following details:

   • ISVPRODID is a numeric product identifier. A user must choose a unique value in the range of 0-65535 for their applications.

   • ISVSVN is a numeric security version to be assigned to the Enclave. This number should be incremented if security-relevant change is made to the application.

   • Memory size – Select the memory size from the drop-down to change the memory size of the enclave.

   • Thread count – Change the thread count to support the application.

   If you selected the Image Type as AWS Nitro, enter the following details:

   • • Memory size

     • CPU count - CPU count is the number of CPUs dedicated to an enclave out of all the CPUs available to the host machine.

   NOTE

   The Memory size and CPU count can be overridden at runtime with the following environment variables:

   • MEM_SIZE

   • CPU_COUNT

   • File persistence – This option is selected by default. This feature allows you to save the filesystem changes to an encrypted container mount. It allows the Nitro system to access a managed Security-object in Fortanix DSM to be able to encrypt and decrypt the Linux Unified Key Setup (LUKS) overlay file system. For more details, refer to User’s Guide: AWS Nitro File Persistence.

     NOTE

     For the File Persistence feature to work, you must configure the app certificate since when a Nitro image runs, it must be configured ahead of time to receive a certificate, which will authorize access to Fortanix DSM to obtain the keys for the Linux Unified Key Setup (LUKS) volume. Without the app certificate, this feature will not work.

7. Click CREATE to create the image (Figure 2).                                                               

8. An image approval task is created and added which is visible on the Tasks page. You can approve the task to approve the application image.

   Refer to User's Guide: Domain and Application Image Approval to approve the application image tasks for the Enclave OS application.

9. After it is approved, a green tick will appear in the Approval status column for that image.

   

   NOTE

   The Source Image tag and Output Image tag are optional fields and by default, the tag value is “latest” internally. If the user is entering a different tag value, then it can either be different values or the same. Once an image of an application is created, it will be pushed to the specified location in the Output Image Name of the application.

3.1 SGX1 and SGX2 Application Support

When an application is converted, the converter app supports signing and running the application in both SGX1 and SGX2 hardware. After the application is converted, the application will have both SGX1 and SGX2 signatures, and the correct signature would be used depending on the hardware available.

The converted container will have two different MRENCLAVE values corresponding to SGX1 and SGX2 respectively. This allows you to run the same converted container on both SGX1 and SGX2 hardware.

On the hardware that supports dynamically adding pages to an enclave, pages for unallocated memory are not included in the initial enclave image, so the enclave can start faster. On hardware without that support, the initial enclave image includes zeroed pages for unallocated memory.

To view the MRENCLAVE values in the Fortanix CCM UI:

1. Go to the detailed view of an image, and select the ENCLAVE tab.

2. Notice the MRENCLAVE (SGX1) and MRENCLAVE (SGX2) fields under the MRENCLAVE Values section.  

   

4.0 Create an Image for EDP Applications

1. After you create an EDP application, click the Applications menu item in the CCM UI left navigation bar and select the required EDP application for which you want to configure an application image.

2. On the following page, click the + IMAGE button to configure the image of the EDP application.  

   

3. In the Add image form, fill in the following details:

   • Image Version: Enter the version of the image.

   • Image Type: Select Intel SGX or AWS Nitro Enclaves as the platform.
     If you select the Image Type as Intel SGX, you have to add the Sigstruct details. The SIGSTRUCT for an enclave is generated when an application is signed. It is used to register the enclave with Fortanix Confidential Computing Manager.

     • Enclave Configuration SIGSTRUCT: Three options are available to add SIGSTRUCT:

       • Upload Enclave SIGSTRUCT: To upload an enclave sigstruct.bin file, click the UPLOAD button as shown in Figure 6. Here is a sample sigstruct.bin file.
         OR

       • Paste Base64-encoded Enclave SIGSTRUCT: You can also paste a Base64-encoded SIGSTRUCT binary in the text box provided.
         OR

       • Enter Enclave SIGSTRUCT Parameters: Enter the following parameters:
         ⁃ MRENCLAVE: This is the identity or hash of the enclave.
         ⁃ MRSIGNER: This is the identity of the signer of the enclave.
         ⁃ ISVPRODID: This is the numeric product identifier to be assigned to the enclave. Choose a unique value in the range 0-65535 for each application.
         ⁃ ISVSVN: This is the numeric security version to be assigned to the enclave. Increment this value when a security-relevant change is made to the application.

         NOTE

         The Enclave SIGSTRUCT Parameters section is automatically filled when you either upload a sigstruct.bin file or paste a base64 encoded enclave SIGSTRUCT.

     If you select the Image Type as AWS Nitro Enclaves, you have to add the Enclave Configuration JSON details which are unique enclave measurements that include a series of Hashes and Platform. The JSON measurements for an enclave are generated when an application is signed. It is used to register the enclave with Fortanix Confidential Computing Manager.

     • Enclave Configuration JSON: Three options are available to add measurements:

       • Upload Measurement JSON: To upload an enclave measurement.json file, click the UPLOAD button as shown in Figure 7. 
         OR

       • Paste Measurement JSON: You can also paste the JSON enclave measurements in the text box provided.
         OR

       • Enter Measurement: Enter the following parameters:
         ⁃ PCR0: This is the hash of the enclave image file.
         ⁃ PCR1: This is the hash of the Linux kernel and bootstrap.
         ⁃ PCR2: This is the Hash of the user application.

         NOTE

         The Enter Measurement section is automatically filled when you either upload a measurement.json file or paste the JSON enclave measurements.

       

       

4. Click CREATE to create the EDP application image.

5. An image approval task is created and added which is visible on the Tasks page. You can approve the task to approve the image.
   Refer to User's Guide: Domain and Application Image Approval to approve the application image tasks for the EDP application.

6. After the image is approved, a green tick will appear in the Approval status column for that image.

   

5.0 Create Image for ACI Application

1. After you create an ACI application, navigate to the Applications menu item from the CCM UI left navigation bar and select the required ACI application for which you want to configure an application image.

2. On the following page, click the + IMAGE button to configure the image of the ACI application. 

   

3. On the Add Image form, fill in the following details:

   • Tag: Enter the tag value of the docker image.

     WARNING

     If an image of an existing ACI application already has the same tag value as the current ACI application image, then it will give an error. Use a new tag value.

   • Add Registry Credentials: Enter the REGISTRY CREDENTIALS for the Input image name. Here, the registry credentials are the credentials needed to access the private docker registry where the image will be pulled. Since the input image is stored in a public registry, there is no need to provide credentials for the input image.

     NOTE

     If a registry credential is given, then the image name must have a domain. For example, if the image is from Docker Hub, then the domain prefix is not required. However, if a registry credential is given, then the image name must start with `docker.io/` or similar.

     • If you have added a registry in a particular account as described in the article User's Guide: Image Registry of Fortanix CCM, then the check box Use saved credentials will be selected by default.

       

   • Advanced Settings: It is recommended to always select the Wait for node registration to begin check box unless the application has special requirements. Selecting this checkbox does not allow the execution, before the Fortanix ACI node agent has retrieved the signed app certificate from the Fortanix CCM backend cluster.

     • CPU Count: Enter the number of CPU cores. By default, the value is 1.

     • Memory in GB: Enter the amount of required RAM in GB units. By default, the value is 1.

4. Click the GENERATE SECURE POLICY button to initiate the build of the JSON Fortifier template, which is used to deploy the confidential ACI container group.

   NOTE

   The creation of an application image may take up to a few minutes.

5. An image approval task is created and added which is visible on the Tasks page. You can approve the task to approve the image.
   Refer to User's Guide: Domain and Application Image Approval to approve the application image tasks for the ACI application.

6. After the image is approved, a green tick will appear in the Approval status column for that image.

   

6.0 Deploy the ACI Application Using Azure Portal

You can deploy the application image to Fortanix ACI either through the Azure Portal or with the Azure CLI.

1. Navigate to the Applications → Image menu item and select the required image from the list.

2. Next, click the POLICY tab to view the JSON Azure Resource Manager (ARM) template encoding of the security policy generated earlier in Section 5.0: Create an Image for ACI Application. 

   

3. Click the DOWNLOAD button to save the ARM template for the deployment procedure.
   Refer to User's Guide: Deploying ACI Using Azure Portal to create an image for the EDP application.